RAIS X-Basic Manuel D'utilisation page 23

US English User Manual RAIS X-Basic, RAIS X-Front & RAIS X-Board
16. Install the side panels using gloves
17. Align the side panels according to the front panel. Dis-
tances front/side panels to be approx. 5 mm.
18. Install the back side panel using gloves
a. The upper nuts and springs to be installed.
b. The lower screws to be installed.
19. If necessary align the back side panel according to
the side panels. Distances side/back side panels to be ap-
prox 5 mm.
20. Remove the two yellow pieces of tape with installation
instructions.
22. Install the top plate and the cut-out plate using gloves
23