RAIS X-Basic Manuel D'utilisation page 13

US English User Manual RAIS X-Basic, RAIS X-Front & RAIS X-Board
c. Block the door by lifting up the door blocking
handle.
d. Remove the front panel:
i. Turn the front left side forward over the
air control handle.
ii. At the same time the front has to be
pulled to the right and over the door
handles.
5. Transport straps and wood pieces to be removed.
6. The stove body is
moved to the aft af the
pallet. A suitable covered
sack truck may be is used
for lifting the stove of the
pallet. The stove may only
be lifted from the back
side.
7. The stove stove is placed on pieces of carpet or other
suitable material and pushed to its correct position (dam-
age to floor material is not RAIS responcibility).
8. Install the back side panel.
13