Using The Stove; Adjusting The Air Control; Control - RAIS X-Basic Manuel D'utilisation

US English User Manual RAIS X-Basic, RAIS X-Front & RAIS X-Board
REMEMBER THE STOVE IS HOT WHILE IN OPERATION, SO KEEP
CHILDREN, CLOTING, AND FURNITURE AWAY. CONTACT WITH A
STOVE WHEN BURNING MAY CAUSE SKIN BURNS.

Using the stove

Only use wood as fuel as described in the firewood section of this manual.

Adjusting the air control

There are three different positions for air control:
Position 1:
The air supply is at its minimum, meaning that only a little secondary air-
comes into the stove.
Position 2:
Push the handle to the right, until it stops. This position gives full second-
ary air. For normal combustion the air control should be positioned some-
where between Pos.1 and Pos. 2. Proper adjustment ensures bright yellow
flames.
Position 3:
Pull gently in the handle upward and push it to the right. The air control is
now completely open and full start-up and primary air is allowed into the
stove. This position is only used for lighting and kindling a fire and never
during normal operation.

Control

If the ashes are white and the combustion chamber walls not covered with soot, the air
adjustment has been correct and the wood sufficiently dry.
37