RAIS X-Basic Manuel D'utilisation page 12

US English
1. Unpack the stove carefully without damaging the paint. The stove is delivered with its
panels mounted and adjusted.
2. A smoke connector is placed in the burning chamber.
The top cover to be taken of using gloves. It is heavy in the
front and two persons is recommended.
3. Backside panel and
side panels to be taken
off using gloves.
Loosen the upper nuts.
Lift up the parts and carefully remove these.
4. The front panel must be taken of using gloves:
a. The front bottom screws to be loosened.
b. Upper front nuts and springs to be loosened
and removed.
12
User Manual RAIS X-Basic, RAIS X-Front & RAIS X-Board