Leckey squiggles Mode D'emploi page 20

10.12 Footplate angle
adjustment
To set the angle to accommodate
plantarflexion or dorsiflexion, simply
loosen or tighten the hand knob (A) to select
the angle you require.
A
10.13 Sandals
To position the user's feet in the sandals
secure the Velcro straps provided so the foot
is held in place. The straps should be placed
over the bridge of the foot and over the
toes. The front strap can be fed through one
of two slots on either side of the sandals,
depending on the size of the user's feet (2).
If the child is wearing sandals or light
footwear check the straps to make sure
the webbing does not irritate the skin.
1
2
10.14 Contoured
headsupport
To adjust the height, depth and angle of the
contoured headrest, loosen the hand knobs
(A) and when set to the desired position
retighten the knobs.
Always use caution to ensure fingers do
not become trapped in the slot when
height adjusting the headrest.
A
A
A
A
10.15 Flat headrest
with lateral supports
To adjust the height, depth and angle of the
flat headrest, adjust using the hand levers (A).
To adjust the width of the laterals loosen
plastic knob (B), slide to desired position and
tighten securely.
B
A
B
A