Clinical Setup For Postural Management - Leckey squiggles Mode D'emploi

9.10 Contoured Headrest
Cushion
To attach the headrest cushion, place the
cushion onto the head support plate, then
snap the side and upper fasteners in place.
Bring the lower flap under the plate and snap
the two remaining fasteners in place.
The plastic reinforcement piece should be
placed between the headrest assembly and
the cushion, but should not be zipped inside
the cushion.
9.11 Flat Headrest Cushion
and Lateral Covers
To attach the flat headrest cushion, place the
cushion onto the head support plate,
then snap the central and upper fasteners
in place. The headrest lateral covers are
attached in the same way as the lateral
support padded covers.
Clinical setup
for Postural
Management
The clinical setup of the product
should be completed by a
technically and clinically competent
person who has been trained in
the use of the product. Leckey
recommend a written record is
maintained of all clinical setups
for this product.
Set the back height, seat depth and
footplate height before placing the
child in the seat. These can be fine
tuned when the child is in the seat.