Leckey squiggles Mode D'emploi page 14

9.5 Trunk harness
With the small or medium trunk harness, you
will receive four connecting straps, brackets,
bolts, washers and locking nuts. Fix the
connecting straps to the backrest or shoulder
support assembly before attaching the trunk
harness. To attach the connecting straps
to the back rest, slide the bracket into the
slot and set at the desired height using the
bolts and washers provided. To attach the
connecting straps to the shoulder support
assembly, it is advisable to attach the straps
directly to the front of the shoulder section
A
without the use of the brackets. The remaining
two side connecting straps are attached to
the two receiving holes, one on either side of
the backrest. Simply attach the trunk harness
to the connecting straps (A, B & C) on the left
and right hand side of the child.
C
B