Leckey squiggles Mode D'emploi page 18

10.5 Backrest angle
The backrest can be angled by loosening
the ratchet handle (A) on the backrest pivot
lock, setting to the required angle and
retightening the ratchet handle securely.
Use the scale on the side of the tube to help
select required angle.
Always ensure the back angle is secure to
maintain the desired posture for the child.
The back angle can be adjusted with the
child in the seat.
A
10.6 Footplate height
To set the height of the footplate loosen the
screw (A) on the front of the calf support tube,
and slide the footplate to the required height
and retighten the screw.
To set the correct height of the footplate
measure the distance from the back of the
child's knee to the bottom of their heel.
This can be set with the child in the seat.
Always ensure the footplate is secure
before placing the child in the seat to
prevent them from sliding down in the seat.
A
10.7 Sacral pad and
lumbar support
There is a velcro panel provided in the lower
part of the backrest cushion and on the
sacral cushion to accommodate positional
wedges/pads (A). These simple "C" shaped
wedges are a very simple but effective
means of providing sacral or lumbar support
depending on the child's needs.
A
10.8 Lateral
supports
Loosen the screw (A) to adjust the width,
height and angle of the lateral supports
and retighten when you have selected the
desired position.
A