Use As Intended; Reasonably Foreseeable Misuse; Risks Associated With Use - Allmatic TITAN 2 Serie Instructions De Service

ALLMATIC
Operation is permitted under the following environmental conditions:
– ambient temperature at place of installation: +10 to +40 °C.
3.2

Use as Intended

The clamping system of the ALLMATIC TITAN 2 (CA) range may only be used to clamp
workpieces.
The manufacturer specifies that the following work is to be carried out on and with the
clamping system:
– operation of the clamping system and maintenance / service;
– monitoring of the functions of the clamping system by the user;
– cleaning of the clamping system by the user;
– regular visual inspections for damage by the user;
– regular maintenance and service work by the service personnel;
– troubleshooting by the service personnel.
Incorrect inputs on the mobile receiver unit MEE cannot lead to any hazardous situations for
operating personnel.
All user functions in the area of the clamping system require sufficiently trained and qualified
personnel. Due to potential dangers, the operator must ensure that trained personnel have also
understood the risks involved in use of the clamping system and can use it responsibly.
3.3

Reasonably Foreseeable Misuse

The following operating conditions are regarded as misuse :
– operation without appropriate monitoring / supervision;
– operation in the case of insufficient maintenance;
– use of non-OEM replacement parts;
The following operating conditions are regarded as misuse :
– operation outside of the defined operating parameters;
– operation with modifications not authorised by the manufacturer;
– operation with defective, deactivated or modified safety equipment.
3.4

Risks Associated with Use

In the event of insufficient clamping force, there is a danger due to parts becoming detached.
Elastic workpieces only produce low clamping force and represent a danger to persons and the
environment.
TITAN 2 (CA) Serie
Safety | 3
EN
51 / 474