Using The Auto-Cappuccino Accessory (Optional) - Krups ESPRESSERIA AUTOMATIC EA 80 Serie Mode D'emploi

Falcon Display Tu?v 0827932:Mise en page 1

4.4 Using the auto-cappuccino accessory (optional)

The XS 6000 auto-cappuccino
accessory facilitates the preparation of a
cappuccino or caffe latte (white coffee)
with your Automatic Espresseria. The
Assembly and fitting of the auto-cappuccino accessory
Insert the stainless steel tube into the
rubber seal of the milk jug. It should reach
down almost to the bottom of the jug.
Set the special nozzle as follows for each
drink :
Turn the central section 180° so that the
drink symbol chosen is at the front.
Fit the special nozzle :
A) remove the steam nozzle (21) and
B) replace it with the special nozzle.
Fill the milk jug with cold milk (6 – 10°C).
Connect the special nozzle and the stain-
less steel tube using the connector tube.
10/03/08
accessory includes a brushed stainless
steel milk jug, a riser tube and a
connector tube, and a special nozzle.
Use and maintenance / SERIE EA 80xx
13:51 Page 23
KRUPS Espresseria Automatic
Cappuccino Café Latte
23