Running The Cleaning Programme - Krups ESPRESSERIA AUTOMATIC EA 80 Serie Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 78
Falcon Display Tu?v 0827932:Mise en page 1
KRUPS Espresseria Automatic
5.2 The cleaning programme
A message on the screen indicates when
a cleaning programme needs to be car-
ried out on the appliance. Cleaning is re-
quired around every 360 preparations.
To run this cleaning programme, you will
need a recipient with a capacity of at
least 0.6 litres and that can fit underneath
the coffee tube, and a KRUPS cleaning
tablet (XS 3000).
The automatic cleaning programme has 3
phases: one cleaning cycle and two rin-
sing cycles. The programme lasts around
20 minutes.
i
Info : You may run this programme at
any time and independently of the war-
ning message via the "Maintenance"
menu and by selecting "Cleaning".

Running the cleaning programme

Ensure you have a recipient with a mini-
mum capacity of 0.6 litres.
!
Caution : Protect your work tops from
any splashes of cleaning solution, espe-
cially if they are made of marble, stone or
wood.
Protect the surface below the drip tray, for
example with paper towels.
When the message "Cleaning required" is
displayed on the screen, press the Pro-
gramme button (2), to display the Clea-
ning menu.
To run the cleaning programme, select the
"Start" option and validate with the OK
button. Then follow the instructions on the
screen.
A message will invite you to open the
"cover".
Open the maintenance cover (17). Insert
the cleaning tablet into the opening (16).
!
Important : Run the cleaning programme
right to the end.
28
10/03/08
conditions, the cleaning cycle must be
carried out when the appliance requests
it.
carry out the cleaning programme imme-
diately when the appliance requests it,
but it must be carried out reasonably
soon. Only use KRUPS cleaning tablets
(XS 3000) otherwise the guarantee will
not cover any material damaged caused
by the use of other brands of tablets.
Cleaning tablets are available from your
KRUPS After Sales Service Centre.
Use and maintenance / SERIE EA 80xx
13:51
Page 28
Caution : To respect the guarantee
!
Caution : You are not obliged to
!

Publicité

Table des Matières
loading

Table des Matières