Krups ESPRESSERIA AUTOMATIC EA 80 Serie Mode D'emploi page 61

Falcon Display Tu?v 0827932:Mise en page 1
If required, rinse it (see point 3.4) or vali-
date the "No" proposition by pressing
"OK".
The screen then displays the drink selec-
tion menu.
If you want to prepare an espresso or a
coffee, read the instructions in point
4.2. To prepare a cappuccino, refer to
point 4.3.
4.2 Preparation of an espresso or a coffee
You can set the quantity of water
required for an espresso between 20 and
70 ml, for a coffee between 80 and 120
ml and for a large coffee between 120
(2x60) ml and 240 (2x120) ml.
Preparation of an espresso or a coffee
Place a cup underneath the coffee tube
(20). You can raise or lower the coffee
tube to suit the cup.
Select your drink using the knob and vali-
date with the "OK" button.
The screen displays the last volume of
water selected during the grinding or hea-
ting procedure.
Check the volume of water saved and mo-
dify if required using the knob (3).
Once the heating cycle is complete, the
machine starts to pour the drink.
Wait for the end of the dispensing and the
message "Drink ready" to be displayed on
the screen before removing the cup.
Caution: DO NOT REMOVE THE HOLDER BEFORE THE END OF THE CYCLE
(i.e. 15 seconds after the coffee has started to be dispensed).
10/03/08
To set the water temperature as desired,
go to the "Settings" menu and select
"Coffee temperature". For the espresso
function, you can choose between two
strengths: "standard" or "strong".
1. Select
!
Use and maintenance / SERIE EA 80xx
13:51 Page 21
KRUPS Espresseria Automatic
2. Validate
Note : To stop the drink being dispensed,
because the cup is full or any other reason,
press the button of your choice. To stop the
drink being dispensed, because the cup is
full or any other reason by turning the knob.
21