Rinsing The Coffee Circuit - Krups ESPRESSERIA AUTOMATIC EA 80 Serie Mode D'emploi

Falcon Display Tu?v 0827932:Mise en page 1

3.4 Rinsing the coffee circuit

After several days without being used,
you need to rinse the coffee circuit. You
may rinse after switching on the ap-
Press the ON/OFF button (1).
A welcome message is displayed on the
screen, then another warning that the ap-
pliance is preheating. A few seconds later,
a question will appear on the screen as-
king if the appliance needs to be rinsed or
not.
Place a sufficiently large recipient under
the coffee tubes, then select "Yes" with
the knob and confirm by pressing OK.
The rinsing procedure starts and stops au-
tomatically, after around 40 ml have pas-
sed through.
The drink selection menu is then displayed on the screen.
10/03/08
pliance or at any time, via the "Mainte-
nance" menu and by selecting "Rinsing".
Use and maintenance / SERIE EA 80xx
13:51 Page 15
KRUPS Espresseria Automatic
15