Safety Guidelines; Conditions Of Use; Electrical Power Supply - Krups ESPRESSERIA AUTOMATIC EA 80 Serie Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 78
Falcon Display Tu?v 0827932:Mise en page 1
KRUPS Espresseria Automatic

1.3 Safety guidelines

!
Danger :
These safety guidelines are intended to protect you and other persons
and the appliance. They must therefore be respected.

Conditions of use

The appliance, the power cord and the
mains plug must not be brought into
contact with humidity or liquids. Any
contact of the conductive parts of the
appliance with humidity or water may
lead to fatal injuries due to the presence
of electricity! This appliance must only be
used indoors in dry areas.
In the case of a change in the ambient
temperature, from cold to hot, wait for a

Electrical power supply

Danger :
Failing to respect these
guidelines may lead to fatal injuries due
to electricity !
Check that the supply voltage marked
on the rating plate of the appliance is the
same as that of your electrical supply.
Only connect the appliance to an earthed
mains socket.
Voltage : 220-240V~/50 Hz.
Ensure that the mains socket is easily
accessible so that the appliance may be
unplugged easily in the event of any
failure or a thunderstorm for example.
For the safety of the appliance, unplug it
from the socket during thunderstorms.
Do not pull the power cord but the plug
itself to unplug it
Unplug it from the mains socket
immediately if any operational failure
occurs or if there is a problem with the
percolation.
6
10/03/08
few hours before using your machine so
that it is not damaged by condensation.
sunlight, exposed to heat, cold, frost or
humidity.
surface such as a hob or close to a
naked flame, in order to avoid any risks of
fire !
Unplug the appliance when it is not to be
used for a long period.
cord is damaged. Using a damaged
power cord or having your appliance
repaired incorrectly means that there is a
risk of electrical shock, fire or short-
circuit. Furthermore, the guarantee on the
appliance will be invalidated in such
conditions. The power cord must be
replaced by a Krups' Approved After-
Sales Service Centre.
the edge of a table or a work top. Do not
leave the power cord close to or in
contact with the hot parts of the
appliance.
extensions or multi-adapter plugs.
guarantee.
Use and maintenance / SERIE EA 80xx
13:50
Page 6
Avoid leaving the appliance in direct
Do not place the appliance on a hot
Do not use the appliance if the power
Do not let the power cord dangle over
We do not recommend the use of
Any incorrect connection invalidates the

Publicité

Table des Matières
loading

Table des Matières