Detaching And Assembling The Storage Bins - Signature Kitchen Suite UPFXC2466 Serie Manuel Du Propriétaire

Detaching and Assembling the
Storage Bins
Glide'N'Serve and Humidity
Controlled Crisper
To remove the Humidity Controlled Crisper and
the Glide'N'Serve, pull out the Crisper
Glide'N'Serve to full extension, lift the front
up, and pull straight out.
To install, slightly tilt up the front, insert the
drawer into the frame and push it back into
place.
To Remove the Glass
(Pantry drawer not shown for clarity)
Lift up the glass under the crisper cover, and
pull up and out.
and
Door Bins
The door bins are removable for easy cleaning
and adjustment.
1
To remove the bin, simply lift the bin up and
pull straight out.
2
To replace the bin, slide it in above the
desired support and push down until it snaps
into place.
NOTE
Some bins may vary in appearance and
will only fit in one location.
CAUTION
• Do not apply excessive force while
detaching or assembling the storage
bins.
• Do not use the dishwasher to clean
the storage bins and shelves.
• Regularly detach and wash the
storage bins and shelves; they can
become easily contaminated by the
food.
OPERATION 37