Description; Accessories Available - Fluke Comark N8004 Manuel D'utilisation

1.

DESCRIPTION

The N8000 range of handheld hygrometers incorporates high level ac-
curacy (both temperature and humidity) with class leading features.
The N8006 has an integral sensor head, while the N8004 has the RH
sensor and its associated electronics, contained in a hand held probe
(N81) connected to the instrument by a cable. This probe is also fitted
with a thermistor for high accuracy air temperature measurement. The
N8004 is also capable of independent temperature measurement via
a special adaptor enabling the use of wide range of Comark thermistor
probes.
Both units use a large LCD allowing both humidity and temperature to
be displayed simultaneously.
There are two basic operation modes for these instruments:
1. Measurement of Relative Humidity.
2. Calculation of Dew point.
1.1
Each hygrometer can be supplied with a rubber boot for those
demanding applications requiring additional protection for the
instrument. Each rubber boot comes complete with a built in
wrist strap for added security. (Part No: CRS/4)
N8004
The N8004 can measure temperature independently of the
N81 using an adaptor (KX7538) that allows the use of any of
Comark's standard 6-way Lumberg thermistor probes.
10

ACCESSORIES AVAILABLE