Sun Fire 880 Guide De Montage page 34

Installing Trim Strips
The lower decorative panels (trim strips) were removed when you removed the
lower side panels. To restore the trim strips:
1. Locate the two trim strips provided in the rackmounting kit.
2. Attach one trim strip to the right front cabinet rail and one trim strip to the left
front cabinet rail.
Using the two captive screws, attach each trim strip as shown in the following
figure.
If only one screw on each trim strip aligns with a rail hole, use one screw to attach
each trim strip to each front rail.
en-30 Sun Fire 880 Server Rackmounting Guide • October 2001