Sun Fire 880 Guide De Montage page 33

2. Install the right and left top brackets using two 10-32 screws for each bracket.
Install the brackets so that they are as close as possible to the top edges of the
system. Choose the closest holes in the rack that line up for this purpose. For each
bracket, use two screws at the front of the cabinet.
3. Locate the Sun Fire 880 server key.
4. Lock the system in the cabinet.
Insert the Sun Fire 880 server key into the keylock on the tray handle and turn the
key 90 degrees counterclockwise.
Locking the tray handle extends the security plates so that they cover the screw
heads on each side of the tray handle. The security plates prevent removal of the
screws that secure the tray and the server to the cabinet.
5. Remove and safeguard the key.
Installing the Server Into the Cabinet en-29