FINITION DE LA CABINE/ FINISHING UP COCKPIT
1) Découper les différentes pièces composant la cabine en suivant les
tracés.
Cut out cockpit parts along the lines as shown.
2) Assembler les différentes pièces précedemment découpées
Assemble the different parts together.
3) Coller la planche de bord sur le tableau comme montré. Coller
ensuite l'autocollant.
Complete the instrument panel as shown. Then,
attach sticker.
4) Même opération pour le tableau de bord arrière après avoir arrondi
et peint la planchette balsa comme sur la photo
Same procedure for rear instrument panel after
having shaped and painted the small balsa part
as photo.
23