ADJUSTMENT - PREMIUM SUPPORT PAD
Adjusting the premium support pad with TT or GT hardware.
1
To adjust the position of the pad depth relative to the
mounting hardware, unzip the cover to reveal the pad
mounting bolts. Loosen the pad mount bolts (A) using
the 5mm hex key.
2
Move the pad to the desired position. Retighten the
bolts using the hex key. Zip the cover closed.
3.5"L x 8"D Premium Pad and
Power Mount TT Hardware Shown
BodiLink Lateral Trunk Support Operation Manual
Recommendation: If one hardware assembly is being used per
pad, install the hardware closer to the center of the pad (depth).
If two hardware assemblies are being assembled onto one pad,
install one hardware assembly towards the front and one towards
the back (depth).
Positioning for the depth of the pad.
12
A