Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
!
CAUTION
If the refrigerator is installed in an unvented enclosure,
separate the intake air and the exhaust air by a baffle.
You may construct a foam baffle from 0.5 inch foam
(See Art01982 - for R788 and F788 models only).
Installation Options
Install a decorative door panel
NOTICE
The decorative door panel must be 4
mm or less in thickness.
1. Remove the door from the refrigerator by removing the two (2) bolts that attach the
door hinge to the top of the refrigerator (See Art01983).
0.5 inch min.
0.5 inch max.
Do not remove the bottom
rails from the refrigerator
cabinet. The rails supply
space under the refrigerator
that is necessary for correct
ventilation.
If you do not make sure that
the ventilation is correct, a
shortened refrigerator life
expectancy, poor refrigeration,
continuous operation,
accelerated battery discharge
and a void warranty will result.
foam baffle
Door hinge
Art01985
8
Art01982
Bolts
Art01983
Panel retainer
Door panel
Publicité
Table des Matières
