Connect The 12/24 Volts Dc Supply - Norcold DC0788B Manuel D'installation Et Guide Du Propriétaire

- Attach the handle to the latch pin.
- Make sure that the angled end of the latch pin is up.
7. Put the door onto the refrigerator and make sure that the gasket seals correctly.
8. Install and tighten the two (2) screws that attach the door hinge to the bottom of the
refrigerator.
Connect the 120/220/240 volts AC supply
!
WARNING
Put the AC power cord into a grounded three-prong receptacle.

Connect the 12/24 volts DC supply

!
CAUTION
Battery charger or
AC/DC converter etc.
INCORRECT
Battery charger or
AC/DC converter etc.
CORRECT
Connect the AC power cord(s) only to a grounded three-prong
receptacle. Do not remove the round ground prong from any
of the AC power cords. Do not use a two prong adapter or an
extension cord with any of the AC power cords. Operation of
the refrigerator without correct ground can cause dangerous
electrical shock or death if you are touching the metal parts of
the refrigerator.
Only connect the refrigerator directly to the battery. Because
they often generate high voltage pulses and cause transistor
defects in the inverter, no other switches, lead wires, or
electrical equipment should share the wiring between the
refrigerator and battery.
Refrigerator
Refrigerator
Transistorized
DC power supply
INCORRECT
Transistorized
DC power supply
CORRECT
10
Refrigerator
Refrigerator
Art01521