Safety Awareness - Norcold DC0788B Manuel D'installation Et Guide Du Propriétaire

Safety Awareness

Read this manual carefully and understand the contents before you install the
refrigerator.
Be aware of possible safety hazards when you see the safety alert symbol on the
refrigerator and in this manual. A signal word follows the safety alert symbol and
identifies the danger of the hazard. Carefully read the descriptions of these signal
words to fully know their meanings. They are for your safety.
!
WARNING
!
CAUTION
Model No. and Serial No.
The model and serial number are on a label which is inside the refrigerator on the
left side and on the cover of this manual.
Operation
This refrigerator is made for refrigerating purposes and operates on 120/220/240
VAC or 12/24 VDC power when installed as written in this manual. The correct
supply voltage(s) is located on the serial plate.
AC is the primary power source. When an AC source is not available, a built-in relay
automatically switches the refrigerator operation to the DC power source. If the
refrigerator is operating on the DC power source and AC power becomes available,
the relay switches the refrigerator operation to the AC power source.
!
CAUTION
This signal word means a hazard, which if ignored, can cause
dangerous personal injury, death, or much property damage.
This signal word means a hazard, which if ignored, can cause
small personal injury or much property damage.
Never store combustible materials near the refrigerator.
Storing combustible materials near the refrigerator creates a
safety hazard and also decreases the ventilation of the cooling
system which decreases the refrigerator performance.
Do not touch the evaporator or other metal parts inside the
refrigerator cabinet with wet hands because they can freeze to
the refrigerator.
Always disconnect all power sources from the refrigerator
when doing routine maintenance. Have service work done only
by a qualified service technician.
3