Operation Without Dmx Controller; Music Control; Colour Spotlight; Automatic Mode - IMG STAGELINE LED-10SPOT Mode D'emploi

5 Operation without DMX Controller

5.1 Music control

To control the spotlight to the beat of music via
its integrated microphone, two sound modes
are available:
white light flashing to the beat of music
light flashing to the beat of music in
changing colours
1) Press the button MENU repeatedly until you
reach the highest menu level.
2) Select the menu item
UP or DOWN.
3) Press the button ENTER: The last sound
mode adjusted (
vated and displayed. Select one of the two
modes with the button UP or DOWN.

5.2 Colour spotlight

For radiating a single colour continuously, the
spotlight offers nine preset colours and one
colour to be individually adjusted.
1) Press the button MENU repeatedly until you
reach the highest menu level.
2) Select the menu item
UP or DOWN.
3) Press the button ENTER: The last colour
mode adjusted (one of the preset colours
... or the individual colour setting
) will be activated and displayed. Select
the desired colour mode with the button UP
or DOWN.
Individual colour setting
In the mode
rately adjust the brightness of the four
colours of the LED in order to mix the desired
shade of colour:
a) If has been selected, press the button
ENTER. The last colour adjusted (red ,
green , blue
ness value will be displayed.
b) Set the brightness of the colour selected
with the button UP or DOWN (indication
0 – 255).
c) Press the button ENTER to go to the next
colour and set its brightness.
with the button
or ) will be acti-
with the button
you will be able to sepa-
or white ) and its bright-

5.3 Automatic mode

Three show programs are available for an auto-
matic light show:
1) Press the button MENU repeatedly until you
reach the highest menu level.
2) Select the menu item
UP or DOWN.
3) Press the button ENTER: The last program
adjusted ( ,
vated and displayed. Select the desired pro-
gram with the button UP or DOWN.
4) To change the program speed, press the but-
ton ENTER: The current speed will be dis-
played. Select one of the nine speeds
to with the button UP or DOWN.

5.4 Master / Slave mode

Several LED-10SPOT spotlights can be oper-
ated in sync in automatic mode or by music
control. The first unit (master) will control the
other units (slaves). Connect the units in a
chain. See chapter 6.1 "Connection" but skip
step 1.
Set the master unit (the first unit in the chain;
its DMX input is not connected) to automatic
mode or music control (
Set the slave units to the slave mode:
1) Press the button MENU repeatedly until you
reach the highest menu level.
2) Select the menu item
UP or DOWN.
3) Press the button ENTER: The slave mode
will be activated and
As soon as the slave unit receives control
signals from the master unit, a dot starts
flashing on the display.
with the button
or ) will be acti-
chapter 5.1 or 5.3).
with the button
will be displayed.
GB
9