Optional Accessories; Applications; Before Operation; Working Environment - Metabo HPT NV 75AN Manuel D'instructions Et De Sécurité

OPTIONAL ACCESSORIES... sold separately
Pneumatic Tool Lubricant
.8 oz. (25 cc) oil feeder
4 oz. (120 cc) oil feeder
1 quart (1 ltr) can
NOTE: Accessories are subject to change without any
obligation on the part of metabo HPT.

APPLICATIONS

Making wooden palettes, drums, and export wooden
boxes.
Packing operations in manufacturing plants, and
other types of packing and crating work in general.
Construction wooden work such as fl oor and wall
framing, roof decking, subfl ooring.
Mobile and modular home construction.

BEFORE OPERATION

Read section titled "SAFETY" (pages 4 – 8).
Make sure of the followings before operation.

WORKING ENVIRONMENT

WARNING
No fl ammable gas, liquid or other fl ammable
objects at worksite.
Clear the area of children or unauthorized
personnel.
AIR SUPPLY
DANGER
NEVER use reactive gases or
other
Explosion may occur.
WARNING
Never connect
which potentially
(13.7 bar 14 kgf/cm
Never use non relieving coupler on Nailer.
000Book̲NV75AN̲US.indb 11 000Book̲NV75AN̲US.indb 11
(Code No. 877153)
(Code No. 874042)
(Code No. 876212)
OPERATING INSTRUCTIONS
bottled gases.
Nailer to pressure
exceeds 200 psi
) if a regulator fails.
2
1. Power source
Use only clean, dry, regulated compressed air as a
power source for this Nailer.
Air compressors used to supply compressed air to
this Nailer must comply with the requirements of
the latest version of ANSI Standard B 19.3 "Safety
Standard For Compressors For Process Industries."
Moisture or oil in the air compressor may accelerate
wear and corrosion in the Nailer.
Drain daily.
2. Filter-Regulator-Lubricator
Use a regulator with a pressure range of 0 – 120 psi
(0 – 8.3 bar 0 – 8.5 kgf/cm
Filter-regulator-lubricator units supply an optimum
condition for the Nailer and extend the Nailer life.
These units should always be used.
Filter ............ The fi lter removes moisture and dirt
mixed in compressed air.
Drain daily unless fi tted with an
automatic drain.
Keep the fi lter clean by regular
maintenance.
Regulator ......The regulator controls the operating
pressure for safe operation of the Nailer.
Inspect the regulator before operation to
be sure it operates properly.
Lubricator .... The lubricator supplies an oil mist to the
Nailer.
Inspect the lubricator before operation
to be sure the supply of lubricant is
adequate.
Use metabo HPT pneumatic tool
lubricant.
English
).
2
11
2018/03/22 15:46:39 2018/03/22 15:46:39