Cautions; Installation; Preparing The System For Use; Installing The Mattress - Arjohuntleigh ALPHA ACTIVE 3 Manuel D'utilisation

3. Installation

Preparing the system
for use

Installing the Mattress

• Do not use the mattress overlay directly on the bed frame.
Mattress Overlay
To Complete the
Mattress Installation

The CPR must be accessible at all times.
Remove the system from the packaging. You should
have the following items:
Alpha Active 3
•
and hanging brackets.
Alpha Active 3
•
set.
• Cover.
Caution
Alpha Active 3
The
installed as follows:
1. Place the overlay on top of the base mattress, with
the tube-set located near the foot end of the bed and
the CPR at the head end. The cells of the mattress
must be uppermost.
2. Secure the overlay to the base mattress by placing
the four long straps under the corners of the base
mattress.
Complete the installation of the mattress overlay as
follows:
1. If not already fitted, place the protective cover over
the mattress. Ensure that the logo is uppermost and
at the foot end of the mattress.
2. Zip the cover onto the mattress starting from the
head end and taking care not to trap any material in
the zip.
3. Ensure that the CPR unit is secured in it's closed
position.
5
pump including mains power cord
mattress overlay with integral tube-
mattress overlay system should be