Chauvin Arnoux 106 Guide De Démarrage Rapide page 7

Indicators
Green indicator: Wi-Fi
Indicator off: Wi-Fi is not activated.
Indicator lit: Wi-Fi is activated but not transmitting.
Indicator blinking: transmission by Wi-Fi in progress.
Blue indicator: Bluetooth
Indicator off: Bluetooth link de-activated.
Indicator lit: Bluetooth link activated but not transmitting.
Indicator blinking: Bluetooth link activated and transmitting.
Red indicator: Recording
Indicator off: no recording.
REC
Indicator blinking: recorder on session programmed.
Indicator lit: recorder in record mode.
Green/orange indicator: On/Off
Indicator lit green: the instrument is on and is powered by the voltage inputs.
Indicator blinking orange: the instrument is powered by the battery. Supply by the voltage inputs is de-
activated or the supply voltage is too low.
SD MEMORY CARD
The PEL accepts SD and SDHC cards, FAT32 formatted, up to a capacity of 32 GB.
The PEL is delivered with a formatted SD card. If you want to install another SD card:
Check that the new SD card is not locked.
„
Format the SD card using PEL Transfer (recommended) or using a PC.
„
Open the elastomer cap marked
„
Press on the SD card in the instrument and withdraw it.
„
Warning: do not withdraw the SD card if recording is in progress.
Insert the new card and push it home.
„
Put the elastomer cap back on to keep the instrument waterproof.
„
INSTALLING PEL TRANSFER
Do not connect the instrument to the PC until you have installed the software and the driver.
Download the latest version of PEL Transfer from our web site
„
www.chauvin-arnoux.com.
Start setup.exe.
„
Then follow the installation instructions.
„
For complete installation instructions, refer to the user's manual.
OPENING PEL TRANSFER
Connect the voltage inputs of the PEL to mains. The instrument is turned on.
„
Connect the PEL to the PC using the USB cable provided. Wait until the driver
„
is fully installed before continuing.
Double-click on the PEL icon
„
Select the Add instrument
„
menu.
Follow the instructions of the Add an instrument wizard. If PEL Transfer does
„
not detect the instrument in the pull-down list, click on the Update button.
When the connection with the instrument is established, the name of the
„
instrument should appear on the side left of the window in the PEL Network
branch of the tree.
Colour and function
.
®
on the desktop to open PEL Transfer.
icon in the toolbar or in the main Instrument
Example of PEL Network directory