Chauvin Arnoux 106 Guide De Démarrage Rapide page 5

QUICK START GUIDE TO THE PEL 106 (EN)
9 indicators providing
status information.
QR code.
Bag to stow the waterproof
plugs of the terminals.
On/Off key.
To put the instrument into operation, connect the
„
terminals to mains.
To stop the instrument, disconnect the terminals and
„
press the button for several seconds.
You cannot switch the PEL off while it is connected to
a power source or while recording is in progress (or
pending).
Installing the SIM card
This is necessary for the 3G-UMTS/GPRS
Unscrew both screws of the SIM card slot and remove
the cover. Insert the SIM card in the direction indicated.
Put the cover back on and screw both screws back in.
Connector for external power supply
(optional mains power unit).
USB connector.
RJ45 Ethernet
connector.
Selection key.
Press the key and hold it down. The REC, ,
indicators light one by one, for 3 seconds each.
Release the key while the desired function is lit.
If you release it while the REC indicator is lit,
„
recording starts or stops.
If you release it while the
„
activated or de-activated.
If you release it while the
„
activated or de-activated.
If you release it while the
„
3G-UMTS/GPRS is activated or de-activated.
SIM card slot.
Slot for SD card.
PEL 106
POWER & ENERGY LOGGER
Directional keypad: four navigation
keys and one validation key
(Enter key).
indicator is lit, Wi-Fi is
indicator is lit, Wi-Fi is
indicator is lit,
LCD display
unit.
and