Troubleshooting; Technical Data; Rating Plate - Progress PAS6100E Notice D'utilisation

• Remove shiny metallic
discoloration: use a solution of water

TROUBLESHOOTING

WARNING! Refer to Safety
chapters.
What to do if...
Problem
You cannot activate or oper‐
ate the hob.
Residual heat indicator does
not come on.
If you cannot find a solution...
If you cannot find a solution to the problem
yourself, contact your dealer or an
Authorised Service Centre. Give the data
from the rating plate. Give also three digit
letter code for the glass ceramic (it is in
the corner of the glass surface). Make

TECHNICAL DATA

Rating plate

Modell PAS6100E
Typ 60 PAD 52 AO
Ser.Nr. .................
PROGRESS
with vinegar and clean the glass
surface with a moist cloth.
Possible cause
The hob is not connected to
an electrical supply or it is
connected incorrectly.
The fuse is blown.
The zone is not hot be‐
cause it operated only for a
short time.
sure, you operated the hob correctly. If not
the servicing by a service technician or
dealer will not be free of charge, also
during the warranty period. The
instructions about the Service Centre and
conditions of guarantee are in the
guarantee booklet.
PNC 949 592 998 04
220 - 240 V 50 - 60 Hz
Made in Germany
6.0 kW
Progress 19
Remedy
Check if the hob is correctly
connected to the electrical
supply. Refer to the connec‐
tion diagram.
Make sure that the fuse is
the cause of the malfunc‐
tion. If the fuse is blown
again and again, contact a
qualified electrician.
If the zone operated suffi‐
ciently long to be hot, speak
to an Authorised Service
Centre.