Coffee Strength (Saeco Brewing System); Stand-By Mode - Philips Saeco Xelsis RI9946/47 Mode D'emploi

Coffee StrenGtH (SBS)
The SBS dial has been carefully designed to give your coff ee the fullness and intensity you desire . Simply turn the dial and set the coff ee
from mild intensity to strong intensity, according to your own taste.
SBS – SAECO BREWING SYSTEM
The Saeco Brewing System (SBS) adjusts the fullness of the brewed coff ee. The coff ee may even be adjusted while brewing.
This adjustment has an immediate eff ect on the selected type of brewing.

Stand-BY mode

The machine is designed for energy saving . After 60 minutes of inactivity, the machine goes into stand-by mode, the boiler is no longer
heated and all the devices turn off .
Power consumption is reduced to a minimum. Press any button to turn the machine on again.
The machine status can be manually changed to stand-by mode by holding the stand-by button pressed for 3 seconds .
Note:
1 The stand-by mode cannot be activated if the service door is left open.
2 The stand-by activation time can be changed in the "MACHINE MENU" on
page 34.
3 When the stand-by mode is activated, the machine performs a rinse cycle
of the internal circuits. It is possible to interrupt the cycle by pressing the
"STOP RINSING" button.
The machine can be turned on again by executing one of the following actions:
1 By pressing any of the control panel buttons .
2 By opening the service door (when closing the door the machine goes back to
stand-by mode) .
3 If a pre-set timer becomes active .
MEDIUM
COFFEE
MILD
COFFEE
17/05/09
USER
MENU
SELECTED
USER
04:17 pm
STRONG
COFFEE
A
BEVERAGE
MENU
SETTINGS
MENU
The red light fl ashes when the machine
is in stand-by mode .
11