Using The Machine; Brewing 1 Or 2 Cups Of Espresso Or Regular Coffee - Philips 2000 Série Mode D'emploi

English
14

Using the machine

Brewing 1 or 2 cups of espresso or regular coffee

4 Place the filter in the empty water tank. Press it down until it cannot
move any further.
5 Fill the water tank with fresh water up to the MAX indication and
slide it into the machine.
6 Let the machine brew hot water until the water tank is empty (see
chapter 'Using the machine', section 'Hot water').
7 Refill the water tank with fresh water up to the MAX indication and
slide it back into the machine.
- The on/off button lights up continuously.
The machine is ready for use.
To guarantee perfect espresso, the machine regularly rinses its inner
circuit with water.This automatic rinsing cycle takes place 30 minutes
after the appliance switches to standby mode or switches off. During
the automatic rinsing cycle, some of the water flows through the inner
circuit directly into the drip tray. Empty the drip tray regularly.
1 Make sure the on/off button lights up green continuously and the
control dial points to the coffee bean icon.
2 Place 1 or cups on the drip tray cover.
3 Press the espresso button or regular coffee button.
Note:You can interrupt the brewing cycle at any time.To do this,
press the same button (for espresso or regular coffee) that you
pressed to start brewing coffee.
- Press the espresso button or regular coffee button once to brew 1
cup of coffee.
The machine grinds the required amount of coffee beans for one
cup and then brews one cup of coffee.