Brewing Senseo ® Coffee - Philips HD7827 Mode D'emploi

EnglisH
12
During the flushing cycle, the water in the water
reservoir is flushed through the machine and the
boiler is filled with water. The flushing cycle takes
some time (approx. 90 to 150 seconds).
Never interrupt the flushing cycle halfway. If you
do, the boiler does not fill itself properly.
Note: During the flushing cycle, the machine produces
more noise than during a regular brewing cycle.
The machine switches off automatically when the
flushing cycle ends.
now your Philips sEnsEO
is ready for use.
Note: If the machine does not work, repeat steps 1-7.
Do not interrupt the flushing cycle.
Brewing SENSEO
Filling the water reservoir
1 Fill the water reservoir with cold water up to
the MaX indication and put it back onto the
machine.
The MIN indication on the water reservoir
indicated the minimum amount of water required
for brewing coffee. Always fill the water reservoir
beyond the MIN level.
Never pour milk, coffee, hot water or carbonated
water into the water reservoir.
coffee machine
®
coffee
®