Philips Saeco Xelsis RI9946/47 Mode D'emploi page 44

36
maCHine menU
Water SettinGS
WATER SETTINGS
WATER HARDNESS
ENABLE FILTER
ACTIVATE FILTER
This menu allows setting correct water parameters for coffee brewing.
To change the machine water hardness setting.
The "Water Hardness" function allows adjusting the machine to the level of
hardness of the water used. The machine will then request descaling at the
right moment .
Measure water hardness as shown on page 5.
To activate/deactivate the warning signal to replace the water filter. By
activating this function, the machine notifies the user when the water filter
needs to be replaced .
OFF: Warning disabled .
ON: Warning enabled (this value is automatically set when the filter is
activated) .
To activate the filter after its installation or replacement. Refer to the relevant
section on page 7 to correctly install and/or replace the filter.