Philips Saeco Xelsis RI9946/47 Mode D'emploi page 51

10
C
A
D
B
At this stage the carafe holes (A) are
lower than the couplings (C).
The carafe pins (B) are located at the
same height of the guides (D) .
12
E
The carafe will be naturally back in
place .
15
CARAFE WASH CYCLE
STEP 1/2
WASH CYCLE...
The cleaning cycle is activated .
The bar shows the cycle progress.
18
Place a large empty container under the
dispensing spout . Rotate the upper part of
the milk carafe directly above the container .
11
B
Insert the carafe by turning it towards the base through a round movement (as shown
in the fi gure), until it is hooked to the hole (E) located in the drip tray.
13
Place a large empty container under the
dispensing spout . Rotate the upper part of
the milk carafe directly above the container .
16
OK
At the end of the wash, fi ll the tank with
fresh drinking water. Press the "OK"
button to confi rm.
19
CARAFE WASH CYCLE
STEP 2/2
RINSING CYCLE...
The rinse cycle is activated. The bar shows the cycle progress.
At the end of the cycle, the machine returns to the product brew menu page.
14
Press the "OK" button to confi rm.
17
REFILL WATER TANK
Remove the carafe, rinse and refi ll it with
fresh drinking water.
Press the "OK" button to confi rm.
Upon completion of the cleaning
cycle, we recommend rinsing all the
components under fresh drinking water.
43
POUR THE DETERGENT INTO THE CARAFE
AND FILL THE CARAFE WITH FRESH WATER
OK
FILL THE MILK CARAFE
WITH FRESH WATER
OK