Figure 6-7: The Password Screen - Cisco Systems LINKSYS WAP54G Guide D'installation Rapide

Wireless-G Access Point
Password
The Password screen allows you to change the Access Point's password and restore factory defaults.
Changing the sign-on password for the Access Point is as easy as typing the password into the AP Password
field. Then, type it again into the second field to confirm.
To restore the Access Point's factory default settings, click the Yes button beside Restore Factory Defaults.
To back up your Access Point configuration, click the Backup button. To restore the backed-up configuration,
click the Restore button.
Click the Save Settings button to apply your changes or Cancel Changes to cancel your changes. If you require
online help, click the Help button.

Figure 6-7: The Password Screen

Chapter 6: Configuring the Wireless-G Access Point 21
The Setup Tab