Figure B-2: The Wpa Pre-Shared Key Screen; Figure B-3: The Wpa Radius Screen; Figure B-4: The Radius Screen - Cisco Systems LINKSYS WAP54G Guide D'installation Rapide

Wireless-G Access Point
WPA Pre-Shared Key
If you do not have a RADIUS server, Select the type of algorithm, TKIP or AES, enter a password in the Pre-Shared
key field of 8-32 characters, and enter a Group Key Renewal period time between 0 and 99,999 seconds, which
instructs the Access Point how often it should change the encryption keys.

Figure B-2: The WPA Pre-Shared Key Screen

WPA RADIUS
WPA used in coordination with a RADIUS server. (This should only be used when a RADIUS server is connected to
the Access Point.) First, select the type of WPA algorithm, TKIP or AES. Enter the RADIUS server's IP Address and
port number, along with a key shared between the Access Point and the server. Last, enter a Group Key Renewal
period, which instructs the Access Point how often it should change the encryption keys.

Figure B-3: The WPA Radius Screen

RADIUS
WEP used in coordination with a RADIUS server. (This should only be used when a RADIUS server is connected to
the Access Point.) First, enter the RADIUS server's IP Address and port number, along with a key shared between
the Access Point and the server. Then, select a WEP key and a level of WEP encryption, and either generate a
WEP key through the Passphrase or enter the WEP key manually.

Figure B-4: The Radius Screen

Appendix B: Wireless Security 42
Maximizing Wireless Security