Cisco Systems LINKSYS WAP54G Guide D'installation Rapide page 4

C
The next screen shown displays
how the Access Point should
be connected while running
this Setup Wizard. Optimally,
you should perform this setup
through a PC on your wired
network. Click the Next button
to continue the Setup Wizard.
D
The Setup Wizard will run a
search for the Access Point
within your network and then
display a list along with the sta-
tus information for each
access point. If this is the only
access point on your network, it
will be the only one displayed.
If there are more than one dis-
played, select the Access Point
by clicking on it and click the
Yes button to continue the
Setup Wizard.
E
You will be asked to sign onto
the Access Point you've
selected. Enter the Password
you've assigned. If none has
been assigned, enter the
default password: admin.
Then, click the OK button. (This
password can be changed
from the Web-based Utility's
Password tab.)
4
C
D
E