Appendix E: Finding The Mac Address And Ip Address For Your Ethernet Adapter; Windows 98Se Or Me Instructions; Figure E-1: Ip Configuration Screen; Figure E-2: Mac Address/Adapter Address - Cisco Systems Linksys WRT150N Mode D'emploi

Wireless-N Home Router
Appendix E: Finding the MAC Address and IP Address for
Your Ethernet Adapter
This section describes how to find the MAC address for your computer's Ethernet adapter so you can use the MAC
filtering and/or MAC address cloning feature of the Router. You can also find the IP address of your computer's
Ethernet adapter. This IP address is used for the Router's filtering, forwarding, and/or DMZ features. Follow the
steps in this appendix to find the adapter's MAC or IP address in Windows 98, Me, 2000, or XP.

Windows 98SE or Me Instructions

1. Click Start and Run. In the Open field, enter winipcfg. Then press the Enter key or the OK button.
2. When the IP Configuration screen appears, select the Ethernet adapter you have connected to the Router via a
CAT 5 Ethernet network cable. See Figure E-1.
3. Write down the Adapter Address as shown on your computer screen (see Figure E-2). This is the MAC address
for your Ethernet adapter and is shown as a series of numbers and letters.
The MAC address/Adapter Address is what you will use for MAC address cloning or MAC filtering.
The example in Figure E-3 shows the Ethernet adapter's IP address as 192.168.1.100. Your computer may
show something different.
NOTE: The MAC address is also called the Adapter Address.

Appendix E: Finding the MAC Address and IP Address for Your Ethernet Adapter

Windows 98SE or Me Instructions

Figure E-1: IP Configuration Screen

Figure E-2: MAC Address/Adapter Address

Figure E-3: MAC Address/Physical Address

68