Figure 5-8: The Confirmation Screen; Figure 5-9: The Congratulations Screen - Cisco Systems LINKSYS WAP54G Guide D'installation Rapide

Wireless-G Access Point
9. You should now review the settings you've chosen. If these settings are correct, click the Yes button to save
these settings. If you wish to change any of the settings, click the No button. You will exit the Setup Wizard
and can start it again to revise your settings.
10. At this point, the configuration performed with the Setup Wizard is complete. To configure any other Access
Points in your network, you can run this Setup Wizard again. Click the Exit button to exit the Setup Wizard.
Chapter 5: Setting Up the Wireless-G Access Point

Figure 5-8: The Confirmation screen

Figure 5-9: The Congratulations screen

13