Navigating The Utility - Cisco Systems LINKSYS WAP54G Guide D'installation Rapide

Wireless-G Access Point

Navigating the Utility

There are four main tabs: Setup, Status, Advanced, and Help. Additional screens will be available from the main
tabs.
Setup
• Basic Setup. Enter the Internet connection and network settings on this screen.
• Password. Change the Access Point's Password and change its settings back to their defaults from this
screen.
• AP Mode. From this screen, you can configure how the Access Point will work with other access points in
your network.
• Log. You can view or save, even email, activity logs from this screen.
Status
• This screen will display current information on the Access Point, its settings, and its performance.
Advanced
• Filters. From this screen, you can allow or prevent access to your network.
• Advanced Wireless. From this screen, you can configure the Access Point's more advanced wireless settings.
• SNMP. This screen allows you to customize the Simple Network Management Protocol (SNMP) settings.
Help
• For help on the various tabs in this Web-based Utility, go to this screen.
Chapter 6: Configuring the Wireless-G Access Point
Navigating the Utility
firmware: the programming code that runs a
networking device
snmp: the standard e-mail protocol on the Internet
15