Cisco Systems LINKSYS WAP54G Guide D'installation Rapide page 7

Masquer les pouces Voir aussi pour LINKSYS WAP54G:
Table des Matières

Publicité

TKIP or AES. Enter a WPA Shared
Key of 8-32 characters.
The WEP key can consist of the
letters "A" through "F" and the
numbers "0" through "9" and
should be 10 characters in
length for 64-bit encryption or
26 characters in length for 128-
bit encryption. All points in your
wireless network must use the
same WEP key to utilize WEP
encryption.
Click the Next button to con-
tinue.
I
You should now review the set-
tings you've chosen. If these
settings are correct, click the
Yes button to save these set-
tings. If you wish to change any
of the settings, click the No but-
ton. You will exit the Setup Wiz-
ard and can start it again to
revise your settings.
I
7

Publicité

Chapitres

Table des Matières
loading

Table des Matières