Maintenance Of Silk'n Facetite; Cleaning Silk'n Facetite; Troubleshooting; Customer Service - Silk-n FaceTite Manuel D'utilisation

8. Maintenance of Silk'n FaceTite™

8.1. Cleaning Silk'n FaceTite™

Unplug Silk'n ® FaceTite™ before cleaning. After each treatment session, it is necessary to clean your Silk'n
FaceTite™ device, and especially the TREATMENT SURFACE.
Use absorbent paper (such as toilet paper or hand drying napkins) to gently wipe the gel residue off the
TREATMENT SURFACE.
Never immerse Silk'n FaceTite™ or any of its parts in water!

9. Troubleshooting

"My Silk'n FaceTite™ does not start."
Make sure the POWER ADAPTOR is properly connected to the FaceTite™ device.
Make sure the POWER ADAPTOR is plugged into an electrical outlet on the wall.
"Heat energy is not emitted and I don't feel any heat emitted from the device even though I pressed the
CENTRAL BUTTON"
Heat will not be emitted if the TREATMENT SURFACE is not attached to your skin. This is a safety feature.
Make sure the device is tightly pressed to your skin before starting treatment.
Do not attempt to open or repair your Silk'n FaceTite™ device. Only authorized Silk'n™ personnel are
permitted to perform repairs.
Trying to open Silk'n FaceTite™ may also damage the device and will void your warranty.
Please contact Silk'n™ Customer Service if you have a broken or damaged device in need or repair.
When Silk'n FaceTite™ reaches its End of Life stage, the device is to be orderly disposed of. Deliver it to the
nearest electronic waste collection point for safe and efficient disposal.
8

10. Customer Service

For more information about Silk'n™ products please enter your local Silk'n™ website, www.silkn.eu or
www.silkn.com.
®
If your device is broken, damaged, in need of repair, or for any other user assistance, please contact your local
Silk'n™ Customer Service:
For USA and Canada customers: 1-877-DO-SILKN / 1-877-367-4556, contact@silkn.com
For customers in other countries: info@silkn.com

11. Specifications

Technology
Wavelength Red light
Wavelength IR
Radio Frequency
Operation and Safety
Package Size
System weight
Temperature
Relative Humidity
Atmospheric pressure
Adaptor
Rated
Output
HT™
620nm±20nm;
850nm±20nm;
1 MHz ±30%; 12W max
Heat stabilizer preventing skin overheating
16.6cm X 45.5cm X 30.2cm
125gr
Operating 10°C to 35°C
Storage -40 to +70°C
Operating 30 to 75%rH
Storage 10 to 90%rH
Operating 700 to 1060hPa
Storage 500 to 1060hPa
Model: KSA24A1200150HE
100-240V; 50-60Hz; 0.5A
12Vdc; 1.5A
9