Do Not Use Silk'n Facetite; Get Started - Silk-n FaceTite Manuel D'utilisation

Do not use Silk'n FaceTite™ if you have a Pacemaker or internal defibrillator, or any other active electrical
implant anywhere in the body.
Do not use Silk'n FaceTite™ if you have a permanent implant in the treated area such as metal plates and
screws, silicone implants or an injected chemical substance.
Do not use Silk'n FaceTite™ if you have a current history or condition of cancer, or pre-malignant moles.
Do not use Silk'n FaceTite™ if you have received radiation therapy or chemotherapy treatments within the
past 3 months.
Do not use Silk'n FaceTite™ if you are pregnant or nursing.
Do not use Silk'n FaceTite™ if you have a history of diseases stimulated by heat, such as recurrent Herpes
Simplex in the treatment area. If so you may treat only following a prophylactic regime.
Do not use Silk'n FaceTite™ if you suffer from poorly controlled endocrine disorders, such as diabetes and
thyroid conditions.
Do not use Silk'n FaceTite™ if you suffer from epilepsy
Do not use Silk'n FaceTite™ if you have a disease related to photosensitivity, such as Porphyria, Polymorphic
Light Eruption, Solar Urticaria, Lupus, etc.
If you have any other condition which in your physician' s opinion would make it unsafe for you to be treated.
If your skin was treated with a physician-prescribed drug within the past 6 months, please consult with your
physician.
Do not use Silk'n FaceTite™ if you have any active condition in the treatment area, such as sores, psoriasis.
Do not use Silk'n FaceTite™ if you had any surgery in the treated area within 3 months prior to treatment.
5. Do not use Silk'n FaceTite™:
With attachments or accessories are not recommended by Home Skinovations Ltd.
If it has a damaged cord or plug.
If you see or smell smoke when it is in use.
If it is not working properly or if it appears damaged.
If its THERMAL SENSOR is cracked, or broken.
If the outer shell is cracked or is coming apart.
While bathing or if it becomes damp or wet. Unplug immediately if it has fallen into water.
4
Warning: Keep Silk'n FaceTite™ away from water! Do not place or store Silk'n FaceTite™ where it can
fall, be pushed or placed into a tub, sink or any other vessel containing water.

6. Get Started!

1. Remove Silk'n FaceTite™ DEVICE and other components from box.
2. Plug the AC/DC ADAPTOR cord into the Silk'n FaceTite™ socket.
3. Plug the AC/DC ADAPTOR into an electrical outlet. All five indicator lights will cycle repeatedly one after
the other.
4. The device is now in STBY mode and is ready to start.
5. Press the CENTRAL BUTTON. The device will turn on to energy level 1 automatically. One INDICATOR
LIGHT will turn on.
Setting Energy Levels:
Silk'n ® FaceTite™ offers 5 levels of energy represented by 5 ENERGY LEVEL INDICATOR LIGHTS.
The selected energy level determines the intensity of Silk'n
To set an energy level, press the CENTRAL BUTTON repeatedly to move between energies, from
1 to 5 and back to 1 again.
When the desired energy is set, the ENERGY LEVEL INDICATOR LIGHTS will indicate the level
chosen.
To put FaceTite™ back in standby mode, give the CENTRAL BUTTON a long press. All five lights
will cycle continuously.
If you wish to change energy levels in mid-treatment, press the button again. This will change energy
level mode on the spot and allow you to treat the same or different areas with different energy
levels according to your needs.
6. After setting the energy level for the treatment, spread a thin layer of Silk'n Slider Gel over the area you
intend to treat.
Please Note: Slider Gel (or any other water-based clear gel) facilitates smooth movement of the
treatment surface over the skin and enables conductivity. To ensure safe and efficient treatment, always
start by applying Slider Gel!
FaceTite™ energy delivered to your skin.
®
5