First Use - Silk-n MirrorLumi Mode D'emploi

EN
by or near children or mentally disabled individuals.
4. The unit should be situated away from direct sunlight or heat sourc-
es such as radiators, electric heaters, heat registers, stoves, or other
units (including amplifiers) that produce heat. Avoid placing on top
of stereo equipment that radiates heat.
5. Do not overload the electrical outlet. Use only the power source
as indicated.
6. Never operate this unit if it has a damaged cord or plug,if it is
not working properly, or if it has been dropped or damaged, or
dropped into water. If the unit's power supply cord or plug is dam-
aged, do not attempt to fix it yourself.
7. To avoid the risk of electric shock, do not disassemble or attempt
to repair the unit. Incorrect repair can cause risk of electric shock
or injury to persons when the unit is used.
8. Do not operate in the presence of explosive and/or flammable fumes.

First use

Clean all parts of the mirrror before first use as described in the chapter
"Cleaning".
Operation
Charging before use
1. Insert the handheld mirror into the stand.
2. Plug the micro USB cable into the stand's charging pin and the USB
adapter port. Put the USB adapter into the wall socket for charging.
3. Blue light is ON when charging.
4. When the blue indicator light shuts off, the mirror is fully charged.
The mirror is fully charged after 16 hours.
Using the mirror
1. The mirror is equipped with a normal side, one side with 5X
6