Evolution STEALTH 3-B Instructions Originales page 28

ELECTRICAL SAFETY - UK PLUG
REPLACEMENT CONNECTION OF
THE DOUBLE INSULATED MAINS
PLUG - UK ONLY
IMPORTANT: The wires in the mains
lead fitted to this product are coloured
in accordance with the following code:
Brown: Live (L) or Red
Blue: Neutral (N) or Black
THIS PRODUCT IS DOUBLE INSULATED
AND THEREFORE DOES NOT REQUIRE
A CONNECTION TO EARTH.
• THE 3 PIN PLUG MUST
COMPLY TO BS1363/A.
• THE FUSE MUST COMPLY TO BS1362.
If for any reason the 13 amp moulded plug
fitted to this product requires replacing, the
replacement must be wired in accordance
with the following instructions:
• Connect the Blue wire to the
terminal marked Neutral (N).
• Connect the Brown wire to the
terminal marked Live (L).
www.evolutionpowertools.com
Ensure that the outer insulation is gripped
by the cord grip and that the wires are not
trapped when replacing the plug cover.
A 13 amp (BS1362) fuse must
be fitted in the plug.
Do not connect any wire to the earth pin
MARKED E on the 3 pin plug.
If in any doubt consult a qualified electrician.
There are no user serviceable parts inside
this product except those referred to in the
manual. Always refer servicing to qualified
service personnel. Never remove any part
of the casing unless qualified to do so;
this unit contains dangerous voltages.
28