Remote Control - Revell Control VR QUAD VR SHOT Manuel De L'utilisateur

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 27
• When disposing of batteries, they
must be discharged or their capacity
must be fully depleted. Cover exposed
terminals with adhesive tape in order
to prevent short-circuiting!
Maintenance and care:
• Please only use a clean, damp cloth
to wipe off the model.
• Protect the model and batteries from
direct sunlight and/or direct heat.
• Never allow the transmitter and
charging unit to come into contact
with water, because the electronics
will be damaged as a result.
Technical changes and differences in
color reserved!
Health and epilepsy warning
If feelings of nausea, fatigue, headaches
or dizziness are experienced during
flight, use of the VR goggles should
be discontinued immediately until the
discomfort passes. If symptoms persist,
consult with a physician. A very low
percentage of the population can react
to certain light stimulus or patterns
- which could be portrayed in the VR
1A Landing skid
1B Propeller
1C Protective rings
1D Camera and WLAN transmitter
2A Video button
2B Button for flight speed
(40%, 70%, 100%) and
Headless Mode
2C Control for thrust
and rotation
2D Trim for rotation
18
goggles - with epileptic seizures. This
can also pertain to persons having no
prior history of epileptic seizures. Should
such cases arise for you or members
of your family, consult with a physician
before using the VR goggles. Do not use
the goggles if you are tired or have not
slept enough. Take a break for 15-30
min. after each flight.
Batteries for the model:
Power supply:
Rated output: 1 x DC 3,7 V / 500 mAh /
1,85 Wh rechargeable LiPo battery
(included)
Batteries for the remote control:
Power supply: DC 6 V
Batteries: 4 x 1.5 V "AA"
(not included)
USB Charger:
Power supply: DC 5 V
USB-Port, 500 mA or higher
Rated output: 5 V / 500 mA max.
1 MODEL
1E Antenna
1F ON/OFF switch
1G MicroSD card slot

2 REMOTE CONTROL

2E Photo button
2F ON/OFF switch
2G Power-LED
2H Trim control for
forwards/backwards
2I Trim control for
sideways
via
2J Control for
forwards/backwards
and sideways
2K Button for flip function
2L Smart phone holder
2M Battery compartment
cover

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

23908

Table des Matières