Camera Video Output - Blackmagic Design Pocket Cinema Camera Manuel D'installation Et D'utilisation

'Project' Metadata
Project metadata behaves the same way whether you are in standby or playback mode.
This metadata always refers to your project as a whole and is independent of clip numbers.
Enter project details using your camera's 'project' slate tab
Project name
Displays your current project name. Tap the pencil icon to change the project name.
Director
Displays the director's name for the current project. Tap the pencil icon to change
the director name.
Camera
Displays a single letter camera index. Tap the pencil icon to change the camera index.
Camera Op
Displays the camera operator. Tap the pencil icon to change the camera operator name.

Camera Video Output

HD Monitoring Output
The camera's full size HDMI connector outputs 1080p HD video so you can easily connect to
monitors or even consumer television sets to preview your images. This 10-bit output also
supports HDR and on screen overlays showing full camera status, making it perfect for on
set monitoring.
HDMI monitoring can be helpful when accessing the LCD is impractical, such as when the
camera is secured high on a jib arm, on a crane, or mounted on a vehicle. Monitoring
information is displayed on your HDMI output by adjusting the HDMI overlays options in the
display settings menu. HDMI overlays provide frame guides and information such as recording
details and camera settings. If you simply want to monitor your shots, you can always turn
overlays off for a clean HDMI output.
By using a converter like the Blackmagic Micro Converter HDMI to SDI, you can convert the
signal to SDI, allowing you to connect to SDI monitors, capture devices, broadcast switchers
and other SDI devices. You can even power the Blackmagic Micro Converter HDMI to SDI via
your Blackmagic Pocket Cinema Camera's USB port.
Entering Metadata 97