Full Screen Mode; Playback Menu - Blackmagic Design Pocket Cinema Camera Manuel D'installation Et D'utilisation

When you double tap on the touchscreen or press the 'focus zoom' button, the zoom level
toggles between your previous magnification level and the full view. For example, if you pinch
to zoom to x8 magnification, double tap zooms out, and a further double tap returns to x8.
Touch to Focus
You can focus your lens in any region of the image by tapping and holding on the LCD screen in
the area that you want to focus. Press the 'focus' button to focus your lens in the chosen
location. Double press the focus button to reset the focus point to the center of the screen.

Full Screen Mode

It can be useful when framing or focusing a shot to temporarily hide your touchscreen's
status text and meters. To hide them all at once, swipe up or down on the LCD touchscreen.
The record indicator, frame guides, grids, focus assist and zebra remain visible.
To show the status text and meters again, swipe up or down again.
Swipe up or down to hide all status indicators on the LCD touchscreen

Playback Menu

Tap the 'play' control button to access the playback menu. You can control previously recorded
clips with your camera's control buttons or the LCD touchscreen.
When using the LCD touchscreen, tap 'play' once to start playback and again to pause. Use the
forward and reverse buttons to skip to the start or end of clips. Tapping 'forward' once moves
you to the next clip. Press the reverse button once to go to the start of the current clip or press
twice to skip back to the start of the previous clip. Playback of clips can also be looped by
activating the loop icon.
The reverse, play, forward and loop icons
To shuttle, hold down either the forward or reverse transport buttons. This plays your footage
back at twice regular speed in either forward or reverse, depending on which transport key
you held.
Touchscreen Controls 60