Blackmagic Design Pocket Cinema Camera Manuel D'installation Et D'utilisation page 229

Monitor settings for both are displayed over 2 pages, containing the following settings.
Frame Guides
Tap the left or right arrows in the 'frame guides' menu setting to cycle through frame guide
options for all outputs on your camera. The options are detailed in the 'touchscreen features'
section of this manual, and are also accessible from the LCD monitoring menu in your LCD
touchscreen head up display. It's worth noting that you can individually select whether frame
guides appear on the LCD touchscreen and HDMI output in their respective 'monitor' menus.
Guide Opacity
Tap the left or right arrows in the 'guide opacity' menu setting to choose the opacity of the
areas blocked out by frame guides on your LCD touchscreen and HDMI output. The options are
25%, 50%, 75% and 100%.
Focus Assist
Your camera has two focus assist modes, including 'peak' and 'colored lines.'
Peak When 'peak' style focus assist is selected, areas of the shot that are in focus
are heavily sharpened on your LCD touchscreen or HDMI output, but not in the
recorded image itself. This causes focused parts of your shot to 'pop' out of the
softer background on screen. As no additional overlays are used, this can be
a very intuitive way to tell when focus is dialled in, especially when the subject
you're focusing on is physically well separated from other elements in shot.
Colored Lines When 'colored lines' style focus assist is selected, a colored line is
superimposed around the parts of the image that are in focus. This can be a
little more intrusive than 'peak' style focus assistance as the lines are drawn
over your image, but especially in busy shots with a lot of visible elements, it
can be a precise focus aid.
Focus Assist Level
To set the level of focus assistance for your LCD and HDMI output, tap the 'low,' 'medium'
or 'high' setting.
Setting the focus assist intensity level does not affect whether focus assistance is enabled on
your Blackmagic Pocket Cinema Camera's LCD and HDMI output. You need to turn focus
assistance on individually for each output in the LCD and HDMI output monitor menus.
Settings 73