Blackmagic Design Pocket Cinema Camera Manuel D'installation Et D'utilisation page 236

Set Function Button
On the top of your Blackmagic Pocket Cinema Camera you'll notice three function buttons.
The dots on the buttons represent function 1, function 2 and function 3. These can be mapped
to frequently used features and are quickly accessible when using your camera.
The function buttons are represented by dots
and are located on the top of your camera
To set these buttons, select a function button and then the behavior, settings and parameters
you want for that function.
1
3
4
1 Button 2 Behavior 3 Setting 4 Parameter
Function Button Behaves as Preset or Toggle
Once you have selected the function button you want to map, you can select a behavior.
The available options are:
Preset When set to this behavior, pressing a function button recalls a combination of
a setting and a parameter.
To set a preset, select the setting you want to use from the 'setting' menu,
and adjust that setting by tapping the arrow icons on either side of the
'parameter' menu.
For example, to set the F1 button to recall a preset aperture of f8, select the
'preset' behavior, tap the 'iris' setting, and tap the arrows on either side of the
'parameter' menu until you get to f8.' Tapping the preset again returns your
camera to the previous setting.
2
Settings 80